Pinnacle Pro Vaporizer Review

The Pinnacle is back and its jacked! No longer a one trick pony the newly Pinnacle Pro does it all, vaporizing oils and waxes as well as herbs. Its new and improved features mixed with its easy to use design is making it a portable vaporizer that is very hard to compete with.

When I received my Pinnacle Pro it was easy to see from the beginning that it was designed for portability being about the size of a large marker. I was extremely pleased with its slim design as it could easily be placed in your pocket or any travel bag.

I was eager to get started so immediately whipped out the quick start guide and began reading. As common with most new electronic devices, your going to need to fully charge your Pinnacle Pro upon receiving it. When you plug in the Pinnacle Pro with the provided power supply, the five LED lights will flash blue until it is fully charged leaving you with five solid blue lights. A full charge approximately takes 3 hours from an empty battery and provides a little less than an hour of continuous use.

Thankfully, for the impatient vaper, the Pinnacle Pro can be used while plugged in and charging. I ground my dry herbs (I did all my grinding with the free grinder that came with my Pinnacle Pro!) and loaded them into the basket with the mesh screen bottom, aka the flower bullet, placed it in the heating chamber and pressed the button to turn it on.

From the time I hit the power button till it was time to vape was around a minute or two.  When vaporizing the herbs I started out on the second heat setting but the flavor wasn’t where I wanted it to be. Upon moving up to the third heat setting I received a satisfying, flavorful, cool vapor.

The amount I used, a little under a half gram, provided me with around 25 pulls which was more than plenty for myself and a couple friends. You can tell when your herbs have been fully vaporized when the taste becomes a bit bitter and the herbs lose all their original color. To power down the unit, hold the power button down for about 2 seconds and the lights will turn off.

When done vaporizing be sure to give the unit plenty of time to cool down. At such high temperatures the chamber cap is warm to the the touch and the flower bullet or full metal jacket is extremely hot. It was nice to find out that the Pinnacle Pro has a safety feature that automatically turns off the unit after 8 minutes of vaporizing to avoid over heating or any damage.

The Pinnacle Pro’s LED display is completely user friendly and alerts the operator of all functions. When the unit has a low battery it will flash blue alternating with the color of the selected heat setting. This indicates to the operator that the unit needs to be charged and that it will shutdown regardless if the battery fully runs out or not.

The Pinnacle Pro package includes everything you need to clean the unit and keep a healthy and fully functioning vaporizer. To begin cleaning, remove either the flower bullet or full metal jacket from the chamber. Next, either use the provided brush, utility tool, or pipe cleaner to remove any left behind material in or around the chamber. To clean the flower bullet or FMJ use hot water or rubbing alcohol.  Be sure to completely rinse off any alcohol and allow either loading vessel to fully dry before placing them back in the chamber. Any moisture will damage the heating element, as before mentioned.

Use coupon code 2863 and get :

  • Additional savings off of the already reduced sales price
  • Free 4 piece grinder
  • Free rewriteable glass storage jar

Buy Now

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>